Description

Full hydraulic transmission, electromechanical dual use, high efficiency, low labor intensity, safe and reliable work
Each hydraulic system is equipped with a balance valve and hydraulic lock for higher safety performance
The boom and important structural parts are made of special steel plates, which can reduce the dead weight of Marine crane and improve its performance
The slewing bearing part is made of 50 manganese forging material with inner tooth turntable
Cold work molding, 8 – prism structure, give full play to the mechanical properties of the material
Boom adopts hydraulic cylinder telescopic, more safe and reliable work
Night lights were installed to extend the working hours
Optional cab, negative arm and three-phase operation
Hydraulic oil pipe rubber pipe adopts double wire ultra-high pressure oil pipe, steel pipe adopts electroplating treatment

1Ton Spider Crane

Specifications		1t
Maximum operating radius		5m×0.3t
Maximum ground lift		5.8mX0.8t
Maximum underground lift		—
Winch device	Lifting speed of hook	0-8m/min
Expansion device	Wire rope specification	Φ8mm×35m
Undulating device	Boom type	4-section boom, U-shaped high-strength manganese
Gyratory device	Boom length/time	1.7m-5m/22sec
Outrigger	Boom angle/time	0-75°/13sec
Traveling device	Swing angle/speed	0-360 ° (continuous)/60sec
Electric machinery	Outrigger movement form	Manual screw out+oil pressure automatic support (two legs)
Engine	Maximum extension (mm)	2900 (long) X2770 (rear), (front)
Operating system	Walking mode	Hydraulic motor drive, two speed
Standard configuration	Travel speed	0-2.5km/h
Vehicle size	Gradeability	20°(36%)
Manufacturing process	VoltagG	Gasoline
Winch device	Manufacturer	9.6 kW
Expansion device	Type/displacement	Electric starting
Undulating device	Startup mode	-5°C~40°C
Gyratory device	Startup performance	Gasoline/8L
Outrigger	Fuel/volume	12v 45AH
Traveling device	Battery capacity	274g/kW-h
electric machinery	Fuel consumption rate	Manual operation, manual walking+remote control (optional)
Engine	Operation type (boom/outrigger), manual walking	Kemai hydraulic system (optional)
Operating system	Operating characteristics	4-section boom, U-shaped high-strength manganese
Standard configuration	Engine power
Vehicle sizL	Length 2095width 600*height 1450
Manufacturing process	Paint assembly process

Model		2.95t
Max. operating radius		7.8m×0.2t
Maximum ground lift		9.2mX0.8t
Winding plant	Lifting speed of the hook	0-8m/min
	Specification of wire rope	Φ8mm×45m
Retractor device	Boom form	5 sections of boom· ，U type high strength manganese
Retractor device	Boom length/time	2.8m-8.2m/22sec
Rise and fall	Boom Angle/time	0-75°/13sec
Gyratory device	Turn Angle/speed	0-360°（continuous）/60sec
Supporting leg	Leg movement form	Manual+ Oil pressure automatic support（Two legs）
Supporting leg	Maximum extension amplitude (mm)	4010X3280
Running gear	Moving way	Hydraulic motor drive、two speed
	Walking speed	0-2.5km/h
	Gradeability	20°(36%)
Motor	Voltage	AC380V
Engine	Producers	Changchai
	Type/displacement	EV80/F195
	Starting mode	Electrical starting
	Starting performance	-5°C~40°C
	Fuel/volume	Diesel /8L
	Battery capacity	12v 45AH
	Fuel consumption rate	274g/kW-h
Operating system	Type of Operation (Boom/leg)、manual walking	Manual operation, manual walking + remote control (optional)
	Operating characteristics	Kemai Hydraulic System (optional)
Standard configuration	Diesel engine and motor (dual power)
Dimension	2830x 800x 1650mm
Workmanship	Baking paint assembly process

Max. operating radius		15mx0.2t
Max. ground lift		16mx0.8t
Winch device	Lifting speed of hook	0-10m/min
Expansion device	Lifting speed of hook	0-10m/min
	Wire rope specification	Φ10mm×80m
Undulating device	Boom type	5-section boom
Gyratory device	Boom type	5-section boom
	Boom length	4m-15m
Outrigger	Boom angle/time	0-75°/13sec
Traveling device	Swing angle/speed	0-360 ° (continuous)/60sec
Winch device	Outrigger movement form	Oil pressure automatic support+manual screw out
Expansion device	Outrigger movement form	Oil pressure automatic support+manual screw out
	Maximum extension (mm)	(length) X (rear), (front)
Undulating device	Walking mode	Hydraulic motor drive, two speed (rubber track)
	Travel speed	0-5.5km/h
	Gradeability	20°(36%)
Electric machinery	Voltage	AC380V
Engine	ManufactureI	In-cloud
	Type/displacement	YN27GBZ/2.7L
	Startup mode	Electric starting
	Startup performance	-5°C~40°C
	Fuel/volume	Diesel/45L
	Battery capacity	24v 45AH
	Fuel consumption rate	230g/kW-h
	Noise level	Rated speed ≤ 81.5dBA (1m)
Operating system	Operation type (boom/outrigger), manual walking	Manual operation, manual walking+remote control (optional)
Operating system	Operation type (boom/outrigger), manual walking	Manual operation, manual walking+remote control (optional)	Standard configuration	Diesel engine and motor (dual power)
Vehicle size	4500x1560x2200mm
Manufacturing process	Paint assembly process

Max. operating radius		16m×0.2t
Max. ground lift		17mX0.9t
Winding plant	Lifting speed of the hook	0-10m/min
Winding plant	Specification of wire rope	Φ11mm×80m
Retractor device	Boom form	5sections of boom
Retractor device	Boom length	4.5m-16m
Rise and fall	Boom Angle/time	0-75°/13sec
Gyratory device	Turn Angle/speed	0-360°（continuous）/60sec
Supporting leg	Leg movement form	Manual+ Oil pressure automatic support
Supporting leg	Maximum extension amplitude (mm)	6400（L）X6100（A）、5300（F）
Running gear	Moving way	Hydraulic motor drive、two speed
	Walking speed	0-5.5km/h
	Gradeability	20°(36%)
Motor	Voltage	AC380V
Engine	Producers	Yun nei
	Type/displacement	YN27GBZ/2.7L
	Starting mode	Electrical starting
	Starting performance	-5°C~40°C
	Fuel/volume	Diesel/45L
	Battery capacity	24v 45AH
	Fuel consumption rate	230g/kW-h
	Noise level	Rated revolution≤81.5dBA (1m)
Operating system	Type of Operation (Boom/leg)	Manual operation, manual walking + remote control (optional)
Standard configuration	Diesel engine and motor (dual power)
Dimension	495015602235mm
Workmanship	Baking paint assembly process

There are no reviews yet.

Be the first to review “Spider Crane”